[ Products ]
GRAFOIL® GTS®
GRAFOIL® GTS® graphite thread-sealant paste for close-tolerance joints to 635 °C and 16 MPa.
GRAFOIL® GTS® thread-sealant paste
Thread sealant paste
GRAFOIL® GTS® is a high-purity graphite paste in a petroleum vehicle. It seals small-diameter, close-tolerance threaded joints. It is also used as a bolt lubricant / anti-seize. It does not harden with time or temperature.
Commercial SKU: GRAFOIL-GTS.
Service limits
- Temperature: up to 635 °C
- Pressure: up to 16 MPa (above this value, application testing is required)
- Pipe size: max. 50 mm (2 in), close-fitting joints
Application
- Clean the threaded surfaces.
- Knead the tube (remove the cap, squeeze out air, recap, then knead).
- Apply paste evenly and fill the threads.
- Assemble and tighten. The joint is ready immediately.
- Close the cap after use.
Store the closed tube at max. 38 °C. Shelf life: 24-month minimum from the date of first use.
Presentations
- 125 g tube
Trademark
GRAFOIL® and GTS® are registered trademarks of NeoGraf Solutions, LLC. ESGRAF does not own these marks. All trademark rights remain with the owner. ESGRAF supplies original GRAFOIL® GTS®.
See the ESGRAF safety data sheet before use.
[ Where it is used ]
Typical applications for this family.
[ Gallery ]
[ FAQ ]
View all FAQsFaces and rings are typically machined from carbon-graphite or impregnated graphite for sealing and controlled wear. We complement with GRAFOIL for monoblock gaskets and packing.
Yes. Flexible GRAFOIL graphite withstands high temperatures, sealing flanges and monoblocks where elastomers fail. We cut and supply sheets, rings, and custom gaskets.
When temperatures are high, dry starts occur, dust/moisture is present, or oil may evaporate. The graphite film remains as residual solid lubrication on chains, guides, shafts, and open mechanisms.
It is a dry graphited coating/lubricant: it forms an adherent film on metal and refractories for sliding, release, and protection.
ESGRAF lubricants and coatings ship from 1/4-gallon packs up to 5-gallon pails (and kg equivalents). Each product sheet lists SKUs and net/gross weights.
[ Quote ]
Need the right specification—not just material?
Tell us your application. Engineering response in under 24 hours.