[ Products ]
Lubricants, coatings & suspensions
ESGRAF dry lubricants, release coatings, graphited greases and sealants for high temperature and dry friction.
What this category includes
ESGRAF supplies graphite lubricants, coatings and suspensions for mold release, dry lubrication and hot-surface protection.
Frequent proprietary lines:
- GRAFOLAGE™ — graphite release paint for foundry.
- GRAFICOAT™ — heavy-duty ultra-lubricating graphite paint.
- GRAFOGREASE™ — heavy-duty graphited grease.
- GRAFOLUB™ — graphited oil for extended lubrication.
- GRAFOTERM™ — release coating for forging and stamping.
- LUBRICHAIN™ and LUBRISHAFT™.
- GRAFOIL® GTS® — original thread-sealant paste (mark of NeoGraf Solutions, LLC).
State temperature, contacting metal and application method so we can select the right product.
Material selection
ESGRAF supplies original grades and validated equivalents. We help you choose by application, operating conditions, and specifications — with clear justification.
By product
ESGRAF commercial product lines.
GRAFICOAT™
Dry hydrophobic film for clean lubrication in heavy-duty service.
- Application
- Lubricación seca metal-metal
- Adhesion
- Película seca, sin goteo
- Key benefit
- No atrae polvo, agua ni hielo
- Typical use
- Equipos expuestos a intemperie
Typical ranges
GRAFOLAGE™
Non-stick release coating for molds, refractories, and hot metal.
- Application
- Desmoldeo y fundición
- Adhesion
- Película antiadherente, secado rápido
- Key benefit
- Resiste choques térmicos
- Typical use
- Moldes, matrices y refractarios
Typical ranges
GRAFOPLATE™
Non-flammable coating for cold stamping and deep drawing.
- Application
- Estampado y embutido en frío
- Adhesion
- Película seca uniforme
- Key benefit
- No flamable; acabados sin marcas
- Typical use
- Troqueles y matrices en frío
Typical ranges
GRAFOTERM™
Ultra-thin release coating for hot stamping, die forging, and forming.
- Application
- Formado a media-alta temperatura
- Adhesion
- Película fina anti-rebote térmico
- Key benefit
- Protege matrices del desgaste
- Typical use
- Estampado, troquelado y forja
Typical ranges
LUBRICHAIN™
Smoke-free eco lubricant for chains and conveyors in ovens.
- Application
- Cadenas y transportadores
- Adhesion
- Película seca adherente
- Key benefit
- Sin humos ni residuos volátiles
- Typical use
- Hornos, tortillerías, conveyors
Typical ranges
LUBRISHAFT™
Dry super-lubricant for shafts, spindles, and loaded mechanisms.
- Application
- Ejes, flechas y rodamientos
- Adhesion
- Penetra y deja película sólida
- Key benefit
- Sin residuos grasos
- Typical use
- Placas deslizantes y mecanismos
Typical ranges
GRAFOIL® GTS®
Graphite thread-sealant paste for close-tolerance joints to 635 °C and 16 MPa.
- Application
- Sellado de roscas
- Format
- Pasta en tubo 125 g
- Service
- Hasta 635 °C y 16 MPa
- Typical use
- Tubería y válvulas de diámetro pequeño
Typical ranges
GRAFOWAX™
Heat-meltable bar for controlled lubrication without drips.
- Application
- Cadenas y superficies calientes
- Format
- Barra sólida termofundible
- Key benefit
- Dosificación precisa sin goteos
- Typical use
- Hornos rotativos, extrusión
Typical ranges
HIDROCOLAGE™
Release coating for glass bending and mold release.
- Application
- Moldeo y curvado de vidrio
- Adhesion
- Película antiadherente, secado rápido
- Key benefit
- Soporta choques térmicos
- Typical use
- Vidrio automotriz y arquitectónico
Typical ranges
Orientative values for the commercial family. The specific grade is confirmed at quote time for your application — these are not a single-grade datasheet.
[ Quote ]
Need the right specification—not just material?
Tell us your application. Engineering response in under 24 hours.